Jura Capresso IMPRESSA J5 - Manual (Page 21)

21
2 Preparing and using your IMPRESSA for the first time
Place a receptacle under the coffee spout.
h l Press the maintenance button.
The machine will rinse itself, stopping automatically.
READY appears on the display. Your IMPRESSA is ready to
use.
After the first time that a coffee speciality has been prepared,
it may happen that FILL BEANS appears on the display
if the grinder has not yet been completely filled with coffee
beans. In that case, prepare a different coffee speciality.
Your IMPRESSA no longer has to be de-scaled if you use the CLARIS
plus filter cartridge.
Perform the ‘Insert filter’ operation without interruptions. This
will ensure that your IMPRESSA always produces its best.
You can also try out the ‘Insert filter’ operation online. Visit the
Knowledge Builder at www.jura.com.
Further information on CLARIS can be found in Chapter 9, ‘CLARIS
plus filter cartridge – Water for perfect coffee’.
After two months, the filter will cease to work. Monitor the
elapsed time as shown on the date plate on the cartridge
holder.
Precondition: READY appears on the display.
m l Keep the Rotary Switch pressed until, RINSE appears on
the display.
ä l Turn the Rotary Switch until FILTER - appears.
m l Press the Rotary Switch to enter the programme item.
NO - appears on the display.
ä l Turn the Rotary Switch until YES appears.
l
o
o
@
o
Inserting filter and
activating Inserting filter and
activating