Jura Capresso IMPRESSA J5 - Manual (Page 27)

27
3 Familiarising yourself with the control options
a l Press the 1 Espresso button.
1 ESPRESSO appears on the display. After this, the
coffee strength is briefly displayed.
The pre-set amount of water flows into the cup and the
process stops automatically.
READY appears on the display.
You can change both the coffee strength before and the amount of
water while your drink is being prepared. These settings are not
saved.
One-off settings before and during coffee preparation always follow
this model.
The following coffee strength options are available:
Mild
Normal
Strong
Xstrong
Example: This is how to prepare a strong cup of coffee.
Precondition: READY appears on the display.
Place a cup under the coffee spout.
ä l Turn the Rotary Switch until STRONG appears on the
display.
d l Press the 1 Coffee button until STRONG is displayed.
1 COFFEE appears on the display, and then STRONG
briefly appears.
The pre-set amount of water flows into the cup. The pre-
paration stops automatically. READY appears on the
display.
Example: This is how to prepare a 110 ML cup of coffee.
Precondition: READY appears on the display.
Place a cup under the coffee spout.
d l Press the 1 Coffee button.
1 COFFEE appears on the display, and then the strength
briefly appears.
p
p
p
p
l
l
One-off settings before
and while your drink is
being prepared One-off settings before
and while your drink is
being prepared
Adjust the coffee strength
before your drink is
prepared
Adjust the coffee strength
before your drink is
prepared
Adjust the amount of water
while your drink is being
prepared
Adjust the amount of water
while your drink is being
prepared