Jura Capresso IMPRESSA J5 - Manual (Page 58)

58
8 Maintenance
The descaling programme lasts approx. 40 minutes.
JURA descaling tablets are available from your stockist.
If you use a CLARIS plus filter cartridge and this is activated,
you will not be prompted to change the filter.
You can also try out the ‘Descale machine’ operation online.
Visit the Knowledge Builder at www.jura.com.
Precondition: DE-SCALE / READY appears on the display,
and the maintenance button h lights up.
h l Press the maintenance button.
EMPTY TRAY
Empty the drip tray and coffee grounds container and put
them back into the machine.
AGENT IN TANK
Remove the water tank and empty it.
Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a container that holds 500 ml of water. This
may take several minutes.
Pour the solution into the empty water tank and insert it in
the machine.
AGENT IN TANK - The maintenance button h
lights up.
Remove the nozzle.
Place a receptacle (at least 500 ml) under the Connector
System © .
h l Press the maintenance button.
DE-SCALING
This causes water to flow out of the Connector System © . The
maintenance button blinks during the descaling operation.
The operation stops automatically - EMPTY TRAY .
Empty the drip tray and coffee grounds container and put
them back into the machine.
Empty the container under the Connector System © .
FILL WATER TANK
Rinse the water tank thoroughly and fill it with cold, fresh
mains water.
o
o
o
@
l
l
l
l
l
l
l
l
l
Descaling following a
prompt
Descaling following a
prompt