Jura Capresso IMPRESSA J5 - Manual (Page 31)

31
3 Familiarising yourself with the control options
Under the programme item INFO , you can query the following
information:
Number of prepared coffee specialities, steam and hot water
Care status and number of executed maintenance pro-
grammes (cleaning, de-scaling, filter change)
Precondition: READY appears on the display.
M l Keep the Rotary Switch pressed until RINSE appears.
Ä L Turn the Rotary Switch until INFO appears.
M l Press the Rotary Switch to enter the programme item.
BUTTONS
M l Press the Rotary Switch.
Total number of the prepared coffee specialities appears on
the display.
By pressing the individual buttons, the respective number of
coffee specialities, steam and hot water is displayed. Open the
filler funnel for pre-ground coffee in order to display this
number.
M l Press the Rotary Switch.
BUTTONS
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit this programme item.
INFO
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programming mode.
READY
Example: To query the care status and number of executed clean-
ings, proceed as follows:
Precondition: READY appears on the display.
M l Keep the Rotary Switch pressed until RINSE appears.
Ä L Turn the Rotary Switch until INFO appears.
M l Press the Rotary Switch to enter the programme item.
BUTTONS
Ä L Turn the Rotary Switch until CLEAN appears.
p
p
o
Query information and
care status Query information and
care status
Query information Query information
Care status query Care status query