Jura Capresso IMPRESSA J5 - Manual (Page 51)

51
7 Permanent settings in programming mode
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programming mode.
READY
The unit for the amount of water is set in the factory. You can set the
unit for the amount of water to ML or OZ .
The time format is set in the factory. You can set the formats
24 HRS or AM/PM .
Example: To change the unit for the amount of water from ML to
OZ , proceed as follows.
Precondition: READY appears on the display.
M l Keep the Rotary Switch pressed until RINSE appears.
Ä L Turn the Rotary Switch until DISPLAY appears.
M l Press the Rotary Switch to enter the programme item.
ML/OZ .
To change the time format, turn the Rotary Switch until
24H/AM PM is displayed.
M l Press the Rotary Switch to enter the programme item.
ML
Ä L Turn the Rotary Switch until OZ appears.
M l Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
ML/OZ
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programme item.
DISPLAY
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programming mode.
READY
o
Units amount of water/
time format Units amount of water/
time format