Jura Capresso IMPRESSA J5 - Manual (Page 54)

54
8 Maintenance
Precondition: READY appears on the display.
Place a receptacle under the coffee spout.
M l Keep the Rotary Switch pressed until RINSE appears.
M l Press the Rotary Switch to enter the programme item.
RINSE
M l Press the Rotary Switch to initiate the rinse operation.
RINSING , rinsing stops automatically and your IMPRESSA
is now ready for use.
After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to replace the filter.
After two months, the filter will cease to work. Monitor the
elapsed time as shown on the date plate on the cartridge
holder.
If the CLARIS plus filter cartridge is not activated, you will not
be prompted to change the filter.
To change the CLARIS plus filter cartridge when prompted to do so
by your IMPRESSA, proceed as follows:
Precondition: FILTER / READY appears on the display, and
the maintenance button h lights up.
h l Press the maintenance button.
CHANGE
Remove the water tank and empty it.
Open up the cartridge holder and remove the old CLARIS
plus filter cartridge and the extension piece.
Stick the extension on top of a new CLARIS plus filter
cartridge.
Insert the filter cartridge into the water tank with light
pressure.
Close the cartridge holder. It will click into place audibly.
Fill the water tank with cold, fresh mains water and reinsert.
Place a receptacle (at least 500 ml) under the Professional
Cappuccino Frother.
l
o
o
o
l
l
l
l
l
l
l
Changing the filter Changing the filter
Change following a prompt Change following a prompt