Jura Capresso IMPRESSA J5 User Manual

Page 57

8 Maintenance

The cleaning operation is now complete. The IMPRESSA is

ready for use again.

You can initiate the ‘Cleaning the machine’ operation manually.

Precondition:

READY

appears on the display.

M l

Keep the Rotary Switch pressed until

RINSE

appears.

M l

Press the Rotary Switch to enter the programme item.

RINSE

Ä l

Turn the Rotary Switch until

CLEAN

appears.

M l

Press the Rotary Switch.

EMPTY TRAY

Continue with the second prompt to take action (indicated

), as is described under ‘Cleaning following a prompt’.

The IMPRESSA builds up deposits of limescale over time and auto-

matically prompts you to descale it. The degree of calcification de-

pends on the degree of hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this

can cause irritation.

Avoid contact with the skin or eyes.

Rinse the descaling agent off with clean water. Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam-

aged and/or traces of detergent could be left behind in the water.

Use only original JURA care products.

If the descaling operation is interrupted, there may be damage to

the machine.

Allow the descaling program to run to the end.

If the descaling agent comes into contact with sensitive surfaces,

damage cannot be ruled out.

Clean up any splashes immediately.

Manual cleaning

Descale machine

CAUTION