Jura Capresso IMPRESSA J5 - Manual (Page 47)

47
7 Permanent settings in programming mode
Buttons Temp. Strength Amount
1 Espresso NORMAL , HIGH MILD , NORMAL ,
STRONG ,
XSTRONG
15 ML – 240 ML
2 Espressi NORMAL , HIGH – 15 ML – 240 ML
(per cup)
1 coffee NORMAL , HIGH MILD , NORMAL ,
STRONG ,
XSTRONG
15 ML - 240 ML
2 coffees NORMAL , HIGH – 15 ML – 240 ML
(per cup)
Hot water REGULAR , NORMAL ,
HOT
– 15 ML – 450 ML
Steam – – 3 SEC – 120 SEC
In the following you will find out how to make permanent settings.
Permanent settings in programming mode always follow the same
model.
Example: To change the temperature of 1 Espresso from NORMAL
to HIGH , proceed as follows:
Precondition: READY appears on the display.
M l Keep the Rotary Switch pressed until RINSE appears.
Ä L Turn the Rotary Switch until BUTTONS appears.
M l Press the Rotary Switch to enter the programme item.
SELECT BUTTON
In the next step, select the coffee speciality button for which
you would like to make settings. No coffee speciality will be
prepared hereby.
o
7 Permanent settings in programming mode 7 Permanent settings in programming mode
Buttons Buttons