Jura Capresso IMPRESSA J5 - Manual (Page 45)

45
5 Preparation at the touch of a button
To ensure that the Professional Cappuccino Frother works perfectly,
you should rinse and clean it regularly. The description for this can
be found in Chapter 8, ‘Maintenance – Professional Cappuccino
Frother’.
To obtain a perfect water flow, attach the exchangeable hot water
nozzle. You can find the nozzle under the cover of the storage
compartment.
There is a danger of scalding from hot water splashes.
Avoid direct contact with the skin.
Start by exchanging the nozzle:
Carefully remove the Professional Cappuccino Frother from
the Connector System © .
Open the cover of the storage compartment. Take out the
hot water nozzle and close the cover again.
Stick the hot water nozzle onto the Connector System © by
lightly rotating.
Place a cup under the hot water nozzle.
q l Press the hot water button.
WATER appears on the display, and then the pre-set tem-
perature briefly appears.
The pre-set amount of water flows into the cup and the
process stops automatically.
READY
By pressing the hot water button several times (within approx.
2 seconds) you can set the temperature to your individual
preference. This setting is not saved.
During preparation, you can change the amount by turning
the Rotary Switch.
l
l
l
l
l
o
o
Hot water Hot water
CAUTION CAUTION