Jura Capresso IMPRESSA J5 - Manual (Page 44)

44
5 Preparation at the touch of a button
Place one level measuring spoon of pre-ground coffee in the
filler funnel.
Close the cover for pre-ground coffee again.
SELECT BUTTON
d l Press the 1 Coffee button.
1 COFFEE appears on the display. After this, PRE-
GROUND is briefly displayed.
The pre-set amount of water flows into the cup and the proc-
ess stops automatically. READY appears on the display.
Precondition: The Professional Cappuccino Frother is installed.
Take the milk pipe out of the Welcome Pack.
Take the protective cap off the Professional Cappuccino
Frother.
Attach the milk pipe to the nozzle.
Insert the other end in a milk carton/bottle or connect it to
a milk container.
Place a cup under the Professional Cappuccino Frother.
Turn the selection lever of the nozzle to the milk position .
k l Press the steam button.
HEATING
READY
appears as soon as the IMPRESSA has heated up.
k l Press the steam button.
STEAM appears on the display. The warm milk is being
prepared.
The operation stops automatically after reaching the pre-set
amount of steam.
The milk preparation can be interrupted at any time. To do
this, press any button.
While milk is being prepared, you can change the pre-set
amount of water by turning the Rotary Switch.
You can continue with preparing milk within approx.
40 seconds. After this, the machine must heat up again.
l
l
l
l
l
l
l
l
o
o
o
Warm milk Warm milk