Jura Capresso IMPRESSA J5 - Manual (Page 48)

48
7 Permanent settings in programming mode
A L Press the 1 Espresso button.
WATER
Ä L Turn the Rotary Switch until TEMP. appears.
M l Press the Rotary Switch to enter the programme item.
NORMAL
Ä L Turn the Rotary Switch until HIGH appears.
M l Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
TEMP.
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programme item.
BUTTONS
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programming mode.
READY
An energy saving mode permanent setting can be made under this
programme item (E.S.M. © ).
Your IMPRESSA has two energy-saving modes:
ENERGY -
Your IMPRESSA is continuously ready for use.
All coffee and milk products, as well as hot water, can be pre-
pared without having to wait.
ENERGY √
After approx. 5 minutes, your IMPRESSA switches to the en-
ergy-saving temperature and is not ready for use.
Before coffee, hot water or milk is prepared, the machine
heats up for approx. 30 seconds.
ENERGY - is defined under the basic settings.
Example: To change the energy-saving level from ENERGY - to
ENERGY √ , proceed as follows:
Precondition: READY appears on the display.
M l Keep the Rotary Switch pressed until RINSE appears.
Ä L Turn the Rotary Switch until ENERGY - appears.
p
u
u
p
u
u
o
Energy save mode Energy save mode