Jura Capresso IMPRESSA J5 - Manual (Page 59)

59
8 Maintenance
Put the water tank back in.
PRESS RINSE - The maintenance button h lights up.
Place a container under the Connector System © .
h l Press the maintenance button.
This causes water to flow out of the Connector System © .
The operation stops automatically - EMPTY TRAY .
Empty the drip tray and coffee grounds container and put
them back into the machine.
Replace the nozzle.
The descaling operation is now complete. The IMPRESSA
heats up and is ready for use again.
If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
You can initiate the operation ‘Descaling the machine’ manually.
Precondition: READY appears on the display and the filter is not
activated.
M l Keep the Rotary Switch pressed until RINSE appears.
M l Press the Rotary Switch to enter the programme item.
RINSE
Ä l Turn the Rotary Switch until DE-SCALE appears.
M l Press the Rotary Switch.
EMPTY TRAY
Continue with the second prompt to take action (indicated
by a l ), as is described under ‘Descaling following a
prompt’.
To ensure that the Professional Cappuccino Frother works perfectly,
you should rinse it with water after every milk preparation.
The IMPRESSA will not prompt you to rinse the Professional
Cappuccino Frother.
l
l
l
l
o
l
o
Manual descaling Manual descaling
Rinse Professional
Cappuccino Frother Rinse Professional
Cappuccino Frother