Intel D865PCD - Manual (Page 92)

Intel Desktop Board D865PCD Technical Product Specification
92
4.4.9 Chipset Configuration Submenu
To access this menu, select Advanced on the menu bar and then Chipset Configuration.
Maintenance Main Advanced Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
Drive Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
The submenu represented in Table 53 is for configuring chipset options.
Table 53. Chipset Configuration Submenu
Feature Options Description
ISA Enable Bit • Disabled
• Enabled (default) When set to Enable, a PCI-to-PCI bridge will only
recognize I/O addresses that do not alias to an ISA
range (within the bridge’s assigned I/O range).
PCI Latency Timer • 32 (default)
• 64
• 96
• 128
• 160
• 192
• 224
• 248 Allows you to control the time (in PCI bus clock
cycles) that an agent on the PC bus can hold the bus
when another agent has requested the bus.
Extended Configuration
• Default (default)
• User Defined
Allows the setting of extended configuration options.
SDRAM Frequency
(Note 1)
• Auto (default)
• 266 MHz
• 333 MHz
(Note 2)
Allows override of the detected memory frequency.
NOTE: If SDRAM Frequency is changed, you must
reboot for the change to take effect. After changing
this setting and rebooting, the System Memory
Speed parameter in the Main menu will reflect the
new value.
continued