Intel D865PCD - Manual (Page 58)

Intel Desktop Board D865PCD Technical Product Specification
58
2.10 Mechanical Considerations
2.10.1 Form Factor
The Desktop Board D865PCD is designed to fit into either a microATX or an ATX-form-factor
chassis. Figure 16 illustrates the mechanical form factor for the Desktop Board D865PCD.
Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by
9.60 inches [243.84 millimeters by 243.84 millimeters]. Location of the I/O connectors and
mounting holes are in compliance with the ATX specification (see Section 1.3).
✏
NOTE
When installing the Desktop Board in a microATX chassis, make sure that peripheral devices are
installed at least 1.5 inches above the main power connector, the diskette drive connector, and the
IDE connector, and the DIMM sockets.
OM17042
6.100
[154.94]
3.100
[78.74]
3.150
[80.01]
6.450
[163.83]
6.500
[165.10]
6.200
[157.48]
5.200
[132.08]
2.85
[72.39]
1.800
[45.72]
0.00
2.600
[66.04]
0.00
Figure 16. Desktop Board D865PCD Dimensions