Intel OCPRF100 MP - Manual (Page 91)

OCPRF100 MP Server System Technical Product Specification
Revision 1.0
84
NOTES: Default values are marked with the "†" symbol.
Clear Event Log Disabled†
Enabled Clears the system event log. This option is reset to disabled on each
boot.
Memory Scrubbing Disabled
Enabled† Enables memory scrubbing by the Profusion ® chip set.
AERR Enable Disabled
Enabled† Enables AERR to be asserted on the processor host buses.
Assert NMI on BERR Disabled
Enabled† Enables BERR to be reported as a critical event via NMI. . Requires
SERR to be enabled as well.
Assert NMI on PERR Disabled†
Enabled Enables PERR to be reported as a critical event via NMI. Requires
SERR to be enabled as well.
Assert NMI on SERR Disabled
Enabled† Enables SERR to be reported as a critical event via NMI.
Enable Host Bus Error Disabled
Enabled† Enables ECC checking on the processor buses.
FPC Error Check Disabled†
Enabled Enables front panel controller (FPC) checking. If enabled, BIOS veri-
fies that it can communicate with the FPC.
HSC Error Check Disabled†
Enabled Enables hot-swap controller (HSC) checking. If enabled, BIOS veri-
fies that it can communicate with the HSC.
Server Management Info Selects Server Management Information submenu.
Table 6-15: Server Management Information Submenu
Feature Description
Board Part Number Displays Board Part Number.
Board Serial Number Displays Board Serial Number.
System Part Number Displays System Part Number.
System Serial Number Displays System Serial Number.
Chassis Part Number Displays Chassis Part Number.
Chassis Serial Number Displays Chassis Serial Number.
BMC Revision Displays Baseboard Management Controller Revision.
FPC Revision Displays Front Panel Controller Revision.
HSC Revision Displays Hot-swap Controller Revision.
Table 6-14: System Management Submenu