Intel OCPRF100 MP - Manual (Page 90)

OCPRF100 MP Server System Technical Product Specification
Revision 1.0
83
6.3.4 Server Menu
Table 6-13: Server Menu through Table 6-16: Console Redirection Submenu describe the Server
Menu and submenus.
NOTES: Default values are marked with the "†" symbol.
Table 6-13: Server Menu
Feature Option Description
System Management Selects System Management submenu.
Console Redirection Selects Console Redirection submenu.
Processor Retest No†
Yes Select “Yes” to clear historical processor status and retest all
processors on the next boot.
EMP Password Switch Disabled†
Enabled Enables the EMP password.
EMP Password Selects the EMP password.
EMP ESC Sequence This field is updated from the front panel controller firmware.
EMP Hangup Line String This field is updated from the front panel controller firmware.
Modem Initialization String This field is updated from the front panel controller firmware.
High Modem Initialization
String This field is updated from the front panel controller firmware.
EMP Access Mode Pre-Boot Only
Always Active
Disabled† Selected when the EMP is enabled. If “Always Active,” the
EMP is always enabled. If “Pre-Boot Only,” the EMP is
enabled during power down or POST only. If “Disabled,” the
EMP is disabled.
EMP Restricted Mode
Access Disabled†
Enabled Enables Restricted Mode. In Restricted Mode, Power
Down, Front Panel NMI, and Reset Control via EMP
are disabled.
EMP Direct Connect/
Modem Mode Direct Connect†
Modem Mode Allows the user to connect to a local machine without using a
modem.
Table 6-14: System Management Submenu
Feature Option Description
Firmware SMIs Disabled
Enabled† Enables SMI generation by agents on the Intelligent Platform Man-
agement Bus. Because BIOS requires SMIs for various tasks, setting
this field to disabled does not disable all sources of SMIs.
System Event Logging Disabled
Enabled† Enables logging of critical events.