IBM NETCOOL 4.3-W - Manual (Page 472)

Appendix A: Configuration
450 Netcool/Proviso Cisco IP Telephony Technology Pack User’s Guide, Version 4.3-W
To manually add the pack-specific UBA parameters to the
dc.cfg
file, follow these steps:
12-f. Open a second terminal emulator.
12-g. On the DataChannel server, change your working directory to the DATA_CHANNEL_HOME/conf
directory (
/opt/datachannel/conf
, by default), by entering the following command:
cd DATA_CHANNEL_HOME /conf
12-h. Make a backup copy of the
dc.cfg
file, by entering the following command:
cp dc.cfg dc.cfg.ORIG
12-i. In a text editor, open the
dc.cfg
file for editing.
12-j. Search for the UBA parameters, which begin with the string
UBA
. These parameters were written to the
dc.cfg
file when you configured the UBA Bulk Collector and installed the DataChannel
configuration, as described in the Netcool/Proviso Installation Guide.
12-k. Copy the pack-specific UBA parameters from the
voip_cisco_ipt_sample_dc.cfg
template file
to the
dc.cfg
file.
12-l. When you are satisfied with your edits, do the following:
— Quit the
voip_cisco_ipt_sample_dc.cfg
template file.
— Write and quit the
dc.cfg
file.
13. Load the DataChannel environment.
In subsequent steps, you will execute
dccmd
commands. To ensure that you can run these commands, load
the shell with the DataChannel environment by following these steps:
13-a. Log in to the DataChannel server as pvuser.
13-b. Change your working directory to the DataChannel home directory (
/opt/datachannel
, by
default), using the following command:
cd /opt/datachannel
13-c. Load the shell with the DataChannel environment, by sourcing the
dataChannel.env
file, as
follows:
. /opt/datachannel/dataChannel.env
14. Restart the DataChannel to activate the UBA and read in changes to
dc.cfg
.
14-a. Open a terminal emulator on the DataChannel server.
14-b. Use the
dccmd
command to stop all DataChannel applications:
dccmd -action stop all
14-c. Use the
dccmd
command to release all daemons running in the DataChannel:
dccmd -action forget all
14-d. Use the following command to find the process identifiers (pids) associated with the DataChannel
visual processes:
DATA_CHANNEL_HOME/bin/findvisual
where:
DATA_CHANNEL_HOME is
/opt/datachannel
, by default.
14-e. Use the following commands to stop each DataChannel visual process:
kill -9
kill -9