IBM NETCOOL 4.3-W User Manual
Page 466
Appendix A: Configuration
444
Netcool/Proviso Cisco IP Telephony Technology Pack User’s Guide, Version 4.3-W
Important:
If you do not have a CUCM environment, skip Step 6 through Step 9, and continue
with Step 10.
6. CUCM environment only: On the DataChannel host, create a directory for each CUCM server from which
CDR, CMR, and Perfmon data files will be requested. For example, if you will be requesting data files from
two CUCM servers, you might create the following directories:
/opt/datachannel/cucm1
/opt/datachannel/cucm2
These directories will contain the ProvisoCUCM application and other files needed to send SOAP requests
to each CUCM server.
Note:
If you will be requesting CDR and CMR data files through a master CUCM server, you need to create
just one directory for those requests. However, if you will be requesting Perfmon data, you must create a separate
directory for each CUCM server from which you will request Perfmon data.
7. CUCM environment only: Copy the following files into each one of the directories you just created in Step 6:
— ProvisoCUCM.jar
— cucm.properties
— startcucm.sh
— stopcucm.sh
These files were included in the technology-specific files you copied to
DATA_CHANNEL_HOME
/scripts
8. CUCM environment only: Configure each of the
cucm.properties
files you copied in Step 7.
Each
cucm.properties
file is associated with an instance of the ProvisoCUCM application that resides
in the same directory as the file. The ProvisoCUCM instance reads the
cucm.properties
file to find the
address and login credentials of the associated CUCM server, the address and login credentials of the
DataChannel host for the CUCM server to use when pushing the requested files via FTP back to the
DataChannel host, and other required configuration details.
The following table describes the fields in the
cucm.properties
files:
[Data Source Name]
The configuration of the specified data source.
•
[Data Source Name]
: for example, [SANFRANCISCO]
•
Address
: the remote IP address and TCP port of the CallManager Publisher
Database (for example, 192.168.1.1,1433). To verify the remote connection
configuration, establish the connection manually from a shell window: telnet
xx.xx.xx.xx 1433
or telnet xx.xx.xx.xx 1370. The remote TCP
port can be 1433 or 1370 according to the SQL Server configuration.
[ODBC]
A global section that defines the global environment for the bridge.
Field
Description
Field
Description
cucm.host
The IP address of the CUCM server associated with this properties file.
Examples:
cucm.host=10.1.2.3
cucm.host=cucm.mycorp.com
cucm.port
The port number for SOAP requests sent to the CUCM server.
Example: cucm.port=443