Invacare 9000 SL User Manual

Page 22

9000 Series

Part No. 1056953

Folding "Hammock or Sling Seat" Models.

1. 9000 XT RECLINERS ONLY - Detach one end of the spreader bar from the

side frame. Refer to STORING/REPLACING THE SPREADER BAR in SECTION 9 of

this manual.

2. Swing footrest/legrest in locked position to the front of the wheelchair.
3. Pivot footplates upward to vertical position.
4. With both hands, grasp the middle of the seat upholstery at the front and back edge

and lift up.

5. Continue to close the wheelchair by grasping the armrest furthest from you and

pulling the armest towards you.

"HAMMOCK OR SLING SEAT"

MODELS

Folding Solid-Seat Models.

1. 9000 XT RECLINERS ONLY - Detach one end of the spreader bar from the

side frame. Refer to STORING/REPLACING THE SPREADER BAR in SECTION 9 of

this manual.

2. Swing footrest/legrest in locked position to the front of the wheelchair.
3. Pivot footplates upward to vertical position.
4. From behind the wheelchair, grasp the

right hand edge of the solid seat.

5. Raise the seat to the hinged side.
6. With both hands, grasp the middle of

the front and back edges of the solid

folding seat and lift up untill the wheel-

chair begins to close.

7. Continue to close the wheelchair by

grasping the armrest furthest from you

and pulling the armrest towards you.

GENERAL

GUIDELINES

SECTION 1

GENERAL GUIDELINES

GENERAL

GUIDELINES

SOLID-SEAT MODELS