Icom IC-756 - Manual (Page 55)

52
7
CLOCK AND TIMERS
The transceiver can be set to turn OFF automatically
after being activated via the power-on timer. The
power-off period can be set to 5–120 min. in 5 min.
steps.
q If the start up screen is not selected (if [F-5]’s func-
tion is [EXIT]), push [F-5] one or more times to exit.
w Push [ (F-5) SET] then [ (F-3) TIME] to enter timer set
mode.
e Push [ (F-1) Y ] or [ (F-2) Z ] to select the power-off pe-
riod item.
r Set the desired power-off periods using the tuning
dial.
- “TIMER – set push [SET]” blinks.
t Push [ (F-4) SET] to enter the set time.
- Push [ (F-5) EXIT] to cancel the setting.
y Push [ (F-5) EXIT] twice to exit timer set mode.
■ Setting power-off period
[TIMER SET] [TIMER SET]
≥ ≥
VOX VOX
ON
ON
COMP COMP
OFF
OFF
≤ ≤
AGC AGC
MID
MID
EXIT EXIT
1 9 : 3 0
6 0 m i n
P o w e r - O N t i m e r s e t
P o w e r - O F F p e r i o d
1 2 : 3 4 T i m e ( n o w )
[TIMER SET] [TIMER SET]
≥ ≥ SET SET
VOX VOX
ON
ON
COMP COMP
OFF
OFF
≤ ≤
AGC AGC
MID
MID
EXIT EXIT
1 9 : 3 0
4 5 m i n
P o w e r - O N t i m e r s e t
P o w e r - O F F p e r i o d
1 2 : 3 4 T i m e ( n o w )
T I M E R - s e t p u s h [ S E T ]
q Preset the power-on time and power-off period as
described previously.
w Push [POWER] momentarily to turn the timer func-
tion ON.
- The [POWER] light lights when the timer function is
ON.
e Push [POWER] for 2 sec. to turn the power OFF.
- The [POWER] light lights continuously.
r When the set time arrives, the power is automati-
cally turned ON.
t The transceiver emits 10 beeps and turns OFF
after the power-off period elapses.
- The [POWER] light blinks while beeping.
- Push [POWER] momentarily to cancel the power-off
timer, if desired.
■ Timer operation
[POWER]