Icom IC-756 - Manual (Page 45)

42
5
MEMORY OPERATION
■ Memory channel screen
The memory channel screen simultaneously shows 9
memory channels and their programmed contents.
You can select a desired memory channel from the
memory channel screen.
• Selecting a memory channel using the
memory channel screen
q If the start up screen is not selected (if [F-5]’s func-
tion is [EXIT]), push [F-5] one or more times to exit.
w Push [ (F-3) MEMORY] to select the memory chan-
nel screen.
e Rotate the tuning dial while pushing [ (F-2) SET] to
select the desired memory channel.
r Push [ (F-5) EXIT] to exit the memory channel
screen.
• Confirming programmed memory
channels
q Select the memory channel screen as described
above.
w Rotate the tuning dial while pushing [ (F-1) ROLL] to
scroll the screen.
e Push [ (F-2) SET] to select the highlighted memory
channel, if desired.
r Push [ (F-5) EXIT] to exit the memory channel
screen.
• Setting a memory channel as a select
memory
Select memory channels are used for select memory
scan. Select memory scan repeatedly scans the se-
lect memory channels only. This is useful to speedup
the memory scan interval. Of course, select memory
channels are also scanned during normal memory
scan.
q Select the memory channel screen as described
at left.
w Rotate the tuning dial while pushing [ (F-2) SET] to
select the desired memory channel.
e Push [ (F-3) SELECT] to set the memory channel as
a select memory or not.
r Repeat steps w to e to program another memory
channel as a select memory channel, if desired.
t Push [ (F-5) EXIT] to exit the memory channel
screen.
NOTE: Setting select memory channels is also
possible in the scan screen.
[MEMORY] [MEMORY]
EXIT EXIT
2.4k 2.4k 9 2.8k 2.8k 455 455 12:34 12:34
1ß
14.195.00 VFO VFO
USB USB
USB USB
14.100.00 14.100.00
1ß 14.100.00 14.100.00
14.205.00 14.205.00
USB USB
USB USB
T X
VFO VFO
9 8 - - . - - - . - - - - - - - - -
9 9 - - . - - - . - - - - - - - - -
P 1 0 . 5 0 0 . 0 0 L S B S C A N E D G E
P 2 2 9 . 9 9 9 . 9 9 U S B S C A N E D G E
1 ß 1 4 . 1 0 0 . 0 0 U S B ˘
4 - - . - - - . - - - - - - - - -
5 - - . - - - . - - - - - - - - -
2 - - . - - - . - - - - - - - - -
3 - - . - - - . - - - - - - - - -
SET SET NAME NAME SELECT SELECT
VOX VOX
OFF
OFF
COMP COMP
OFF
OFF
ROLL ROLL
ANT ANT
1
METER METER
Po Po
P.AMP P.AMP
OFF OFF
ATT ATT
OFF
OFF
AGC AGC
MID
MID
VOX VOX
OFF
OFF
COMP COMP
OFF
OFF
ROLL ROLL
ANT ANT
1
METER METER
Po Po
P.AMP P.AMP
OFF OFF
ATT ATT
OFF
OFF
AGC AGC
MID
MID [MEMORY] [MEMORY]
EXIT EXIT
2.4k 2.4k 9 2.8k 2.8k 455 455 12:34 12:34
1ß
14.195.00 VFO VFO
USB USB
USB USB
14.100.00 14.100.00
1ß 14.100.00 14.100.00
14.205.00 14.205.00
USB USB
USB USB
T X
VFO VFO
9 8 - - . - - - . - - - - - - - - -
9 9 - - . - - - . - - - - - - - - -
P 1 0 . 5 0 0 . 0 0 L S B S C A N E D G E
P 2 2 9 . 9 9 9 . 9 9 U S B S C A N E D G E
1 ß 1 4 . 1 0 0 . 0 0 U S B ˘
4 - - . - - - . - - - - - - - - -
5 - - . - - - . - - - - - - - - -
2 - - . - - - . - - - - - - - - -
3 - - . - - - . - - - - - - - - -
SET SET NAME NAME SELECT SELECT
“ ß ” appears for select memory channel.
VOX VOX
OFF
OFF
COMP COMP
OFF
OFF
ROLL ROLL
AGC AGC
MID
MID [MEMORY] [MEMORY]
EXIT EXIT
9 8 - - . - - - . - - - - - - - - -
9 9 - - . - - - . - - - - - - - - -
P 1 0 . 5 0 0 . 0 0 L S B S C A N E D G E
P 2 2 9 . 9 9 9 . 9 9 U S B S C A N E D G E
1 ß 1 4 . 1 0 0 . 0 0 U S B ˘
4 - - . - - - . - - - - - - - - -
5 - - . - - - . - - - - - - - - -
2 - - . - - - . - - - - - - - - -
3 - - . - - - . - - - - - - - - -
SET SET NAME NAME SELECT SELECT
“ ˘ ” appears when the memory
channel is selected.