Icom IC-756 - Manual (Page 44)

41
5
MEMORY OPERATION
■ Memory channels
The transceiver has 101 memory channels. The mem-
ory mode is very useful for quickly changing to often-
used frequencies. All 101 memory channels are tunable which means the
programmed frequency can be tuned temporarily with
the tuning dial, etc. in memory mode.
MEMORY
CHANNEL
MEMORY
CHANNEL
NUMBER
CAPABILITY
TRANSFER
TO VFO
OVER-
WRITING
CLEAR
Regular memory
channels
1–99
One frequency and one mode in
each memory channel.
Yes Yes Yes
Scan edge
memory
channels
P1, P2
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
Yes Yes No
• Using the [ Y Y ]/[ Z Z ] keys
q Push [VFO/MEMO] to select memory mode.
w Push [ Y ]/[ Z ] several times to select the desired
memory channel.
- Push and hold [ Y ]/[ Z ] for continuous selection.
- [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [VFO/MEMO] again.
• Using the keypad
q Push [F-INP].
w Push the desired memory channel number using
the keypad.
- Enter 100 or 101 to select scan edge channel P1 or
P2, respectively.
e Push [ Y ] or [ Z ] to select the desired memory
channel.
■ Memory channel selection
VFO VFO
14.100.00
CW CW
USB USB
14.195.00 14.195.00
T X
ANT ANT
1
METER METER
Po Po
2.4k 2.4k 9 2.8k 2.8k 455 455 12:34 12:34
1
VFO VFO
24.960.00
CW CW
USB USB
14.195.00 14.195.00
T X
ANT ANT
1
METER METER
Po Po
2.4k 2.4k 9 2.8k 2.8k 455 455 12:34 12:34
12 12
1ß
14.195.00 VFO VFO
USB USB
CW CW
14.100.00 14.100.00
T X
ANT ANT
1
METER METER
Po Po
2.4k 2.4k 9 2.8k 2.8k 455 455 12:34 12:34
VFO/
MEMO
or
ß
VFO VFO
14 . 100 .12
CW CW
USB USB
14.195.00 14.195.00
T X
ANT ANT
1
METER METER
Po Po
2.4k 2.4k 9 2.8k 2.8k 455 455
1
VFO VFO
T X
1
VFO VFO
24.960.00
CW CW
USB USB
14.195.00 14.195.00
T X
ANT ANT
1
METER METER
Po Po
2.4k 2.4k 9 2.8k 2.8k 455 455 12:34 12:34
12 12
14.100.00
CW CW
USB USB
14.195.00 14.195.00
ANT ANT
1
METER METER
Po Po
2.4k 2.4k 9 2.8k 2.8k 455 455 12:34 12:34
F-INP
ENT
F-in P
Я
Я
1 2
or
then