Intel IXM5414E User Manual
Page 234
224
Intel® Blade Server Ethernet Switch Module IXM5414E
Minimum Bandwidth
Displays the minimum guaranteed bandwidth of this bandwidth allocation profile in
Mbps.
Maximum Bandwidth
Displays the maximum allowable bandwidth of this bandwidth allocation profile in
Mbps.
BW provisioning traffic class commands
config bwprovisioning trafficclass bwallocation
Use this command to associate a bandwidth allocation profile with a traffic class. The
parameter must represent a valid bandwidth allocation profile.
Format
config bwprovisioning trafficclass bwallocation
config bwprovisioning trafficclass create
Use this command to create a traffic class. The
only supported value for type is vlan. The
characters.
Format
config bwprovisioning trafficclass create
config bwprovisioning trafficclass delete
Use this command to delete a traffic class from the system. The
class to be deleted. When a traffic class is deleted, its association with a bandwidth allocation profile
is automatically removed.
Format
config bwprovisioning trafficclass delete
config bwprovisioning trafficclass port
Use this command to attach a traffic class to a specific interface. The
a valid physical or logical interface. The sum of the minimum bandwidth allocations of all traffic
classes associated with the same interface should not exceed the total bandwidth of the interface.
There is no restriction on the sum of the maximum bandwidth of all traffic classes attached to the
same port. When a traffic class is attached to a LAG interface, the bandwidth allocation profile
minimum bandwidth parameter will not be applicable to the traffic class.
Format
config bwprovisioning trafficclass port
config bwprovisioning trafficclass vlan
Use this command to associate a VLAN with a traffic class. The
the traffic class within the range of 1 to 4094.
The VLAN parameter can identify an invalid VLAN (the VLAN does not need to exist in the
system.)
Format
config bwprovisioning trafficclass vlan
config bwprovisioning trafficclass weight
Use this command to configure the priority for this traffic class. The
value between 1 and 1024.
Default
1
Format
config bwprovisioning trafficclass weight