Intel IXM5414E - Manual (Page 11)

1
1 Introducing the Intel® Blade Server Ethernet
Switch Module IXM5414E
Thank you for purchasing an Intel® Blade Server Ethernet Switch Module IXM5414E. This
Installation and User’s Guide contains information about:
• Setting up and installing your switch module
• Configuring your switch module
For installation details, see Chapter 2 “Installing and Removing the Intel® Blade Server Ethernet
Switch Module IXM5414E” on page 9. For additional information, see the instructions in your
appropriate server board chassis publications.
Your IXM5414E switch module is one of up to four switch modules that can be installed in the
SBCE configuration of the blade chassis.
This high-performance IXM5414E switch module is ideally suited for networking environments that
require superior microprocessor performance, efficient memory management, flexibility and reliable
data storage.
Performance, reliability and expansion capabilities were key considerations in the design of your
switch module. These design features make it possible for you to customize the system hardware to
meet your needs today, while providing flexible expansion capabilities for the future.
The product name, machine type and serial number are located on the identification label on the side
of the IXM5414E switch module. The Media Access Control (MAC) address also is located on the
identification label. See “Major components of the IXM5414E switch module” on page 3 for an
illustration showing the location of the identification label.
/ NOTE
The MAC address is also located on a separate label on the information panel under the
external Ethernet port connectors.