Mac filter commands – Intel IXM5414E User Manual
Page 203
Intel® Blade Server Ethernet Switch Module IXM5414E
193
Mbr Ports
A listing of the ports that are members of this LAG, in port notation. There can be a
maximum of 8 ports assigned to a given LAG.
Port Speed
The speed of the LAG. A LAG is always full-duplex.
MAC filter commands
config macfilter adddest
Use this command to add the
address of
byte hexadecimal number in the format of 00-12-34-56-78-90. The
a valid VLAN.
The
for the MAC filter. If
Packets for the specified MAC address and VLAN ID will only be transmitted out of ports that are in
the filter set.
Format
config macfilter adddest
config macfilter create
Use this command to add a static MAC filter entry for a MAC address and VLAN pair. The
56-78-90.
Filters may not be defined for MAC addresses:
•
00-00-00-00-00-00
•
01-80-C2-00-00-00 to 01-80-C2-00-00-0F
•
01-80-C2-00-00-20 to 01-80-C2-00-00-21
•
FF-FF-FF-FF-FF-FF
The
Up to 100 static MAC filters may be created.
Format
config macfilter create
config macfilter deldest
Use this command to remove one or more ports from the destination filter set for the MAC filter
with the MAC address of
specified as a 6-byte hexadecimal number in the format of 00-12-34-56-78-90. The
parameter must identify a valid VLAN.
The
set for the MAC filter. If
set.
Format
config macfilter deldest
config macfilter remove
Use this command to remove the static MAC filter entry for the given MAC address on the VLAN.
The
12-34-56-78-90. The