Intel IXM5414E User Manual
Page 209
Intel® Blade Server Ethernet Switch Module IXM5414E
199
Port Forwarding State
The forwarding state of the port within the CST.
Port Role
The role of the specified interface within the CST.
Auto-calculate Port Path Cost
Indicates whether automatic calculation of the port path cost is enabled.
Port Path Cost
The configured path cost for the specified interface.
Designated Port Cost
Path Cost offered to the LAN by the designated port.
Designated Bridge
The bridge containing the designated port.
Designated Port Identifier
Port used to forward frames towards the root bridge for this CST on this LAN. It is
the port with the lowest cost path to the bridge and the highest port priority.
Topology Change Acknowledgement
Value of flag in next Configuration BPDU transmission indicating if a topology
change is in progress for this port.
Hello Time
The hello time in use for this port.
Edge Port
The configured value indicating if this port is an edge port.
Edge Port Status
The derived value of the edge port status. True if operating as an edge port; false
otherwise.
Point To Point MAC Status
Derived value indicating if this port is part of a point to point link.
CST Regional Root
The regional root identifier in use for this port.
CST Path Cost
The configured path cost for this port.
show spanningtree cst port summary
Use this command to display the status of one, some or all ports within the CST. The parameter
Format
show spanningtree cst port summary
Port
The interface being displayed.
STP Mode
Whether the STP is enabled or disabled on the port.
STP State
The port’s current spanning tree state. This state controls what action a port takes on
receipt of a frame. Possible states are: disabled, blocking, listening, learning,
forwarding and broken.
Port Role
The role of the specified port within the spanning tree.
Link Status
The operational status of the link. Possible values are “Up” or “Down”.
Link Trap
The link trap configuration for the specified interface.