Intel IXM5414E User Manual
Page 220
210
Intel® Blade Server Ethernet Switch Module IXM5414E
Format
config dot1x port supptimeout
config dot1x port transmitperiod
Use this command to configure the value, in seconds, of the timer used by the authenticator state
machine on the specified port to determine when to send an EAPOL EAP Request/Identity frame to
the supplicant. The transmit period must be a value in the range of 1 and 65535.
Default
30
Format
config dot1x port transmitperiod
config dot1x port users add
Use this command to add the specified user to the list of users with access to the specified port(s).
The user must be a configured user and the port must be a valid port. By default, a user is given
access to all ports.
Default
all
Format
config dot1x port users add
config dot1x port users remove
Use this command to remove the specified user from the list of users with access to the specified
port(s).
Format
config dot1x port users remove
show dot1x port detailed
Use this command to display the details of the IEEE 802.1X configuration parameters for the
specified port.
Format
show dot1x port detailed
Port
The interface whose configuration is displayed on this row.
Protocol Version
The version of IEEE 802.1X active on the port. Currently this is always 1.
PAE Capabilities
The port access entity state of the port. Either authenticator of supplicant.
Authenticator PAE State
The current state of the authenticator state machine. Possible values are initialize,
disconnected, connecting, authenticating, authenticated, aborting, held,
forceauthorized, and forceunauthorized.
Backend Authentication State
The current state of the back-end authentication state machine. Possible values are
request, response, success, fail, timeout, idle, and initialize.
Quiet Period (secs)
The timer used by the authenticator state machine on this port to define periods of
time in which it will not attempt to acquire a supplicant. The value is expressed in
seconds and will be in the range 0 and 65535.
Transmit Period (secs)
The timer used by the authenticator state machine on the specified port to determine
when to send an EAPOL EAP Request/Identity frame to the supplicant. The value is
expressed in seconds and will be between 1 and 65535.