Intel IXM5414E - Manual (Page 148)

138 Intel® Blade Server Ethernet Switch Module IXM5414E
ACL Make a selection from the pull-down menu. You may create a new ACL or update the
configuration of an existing ACL.
ACL ID
ACL ID must be a whole number between 1 and 100.
Ports
This dynamic multi-selector lists all available valid interfaces for ACL mapping. All non-
routing physical interfaces and interfaces participating in LAGs that are not already
assigned to an ACL are listed. You can map an interface to one and only one ACL, but
multiple interfaces can be assigned to one ACL.
Direction
Select the packet filtering direction for the ACL from the pull-down menu. Currently the
only choice is Inbound. The packet direction for a given ACL is the same for all affected
interfaces.
Table
Displays the current and maximum number of ACLs.
Current Size/Max Size
Displays the number of existing ACLs and the maximum number of configurable ACLs.
Click the Apply button to send the updated configuration to the switch. Configuration changes take
effect immediately. If you want the switch to retain the new values across a power cycle you must
perform a save.
Click the Delete button to remove the currently selected ACL from the switch configuration.