Intel IXM5414E User Manual
Page 212
202
Intel® Blade Server Ethernet Switch Module IXM5414E
Default
disable
Format
config vlan mcaststorm <1-4094>
config vlan name
Use this command to change the name of a VLAN. The name is an alphanumeric string of up to 16
characters, and the number identifies an existing VLAN.
Default
The name for VLAN ID 1 is always Default. The default name for other VLANs is
a blank string.
Format
config vlan name
config vlan participation
Use this command to configure the degree of participation for a specific interface in a VLAN. The
number identifies an existing VLAN, and the parameter
ports to be affected.
Format
config vlan participation
Participation options are:
include
The interface is always a member of this VLAN. This is equivalent to registration
fixed.
exclude
The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
auto
The interface is dynamically registered in this VLAN by GVRP. The interface will
not participate in this VLAN unless a join request is received on this interface. This
is equivalent to registration normal.
config vlan port acceptframe
Use this command to configure the frame acceptance mode for the specified port(s). Possible values
are:
all
Both tagged and untagged frames are accepted. Untagged frames will be assigned the PVID
and default priority configured for the port(s) for this VLAN.
vlan
Untagged frames are discarded.
With either option, VLAN tagged packets are forwarded in accordance with the IEEE 802.1Q
VLAN Specification.
Default
all
Format
config vlan port acceptframe
config vlan port priority
Use this command to change the default IEEE 802.1p port priority assigned to untagged frames
received on the specified port(s) for the specified VLAN.
Default
0
Format
config vlan port priority <0-7>
config vlan port pvid
Use this command to change the VLAN ID that the specified port(s) will assign to untagged frames
if untagged frames are accepted.