Wireless > network page – Iomega SBG1000 User Manual
Page 82
76
SBG1000 Wireless Cable Modem Gateway User Guide
X
Exit
Overview Installation Troubleshooting Contact
FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Wireless > NETWORK Page
Use this page to configure wireless LAN settings.
You can use the Motorola SBG1000 Wireless Cable Modem Gateway to operate an IEEE 802.11b wireless LAN
without changing its default settings.
Wireless > NETWORK page fields
Field Description
Enable Wireless
Interface
Check this box to enable the wireless interface.
Sets a unique identifier to associate wireless
with the SBG1000
. This
distinguishes between multiple wireless LANs in the same area. All clients on wireless LAN
must have the same Network Name as the access point. It can be any alphanumeric,
case-sensitive string up to 32 characters. The default is “Motorola.” We strongly recommend
not using the default.
Channel
Sets the wireless radio channel. You can change the channel if you encounter interference on
the default channel. The default is 1 (one), except in countries where the first channel
permitted for IEEE 802.11b wireless operation is not one.
Basic Rates
Sets the wireless data transmission rates that all wireless LAN clients must be able to receive:
•
1, 2
. The
SBG1000
attempts to transmit at 2 Mbps. Use this setting if the wireless
LAN has only legacy
clients.
•
1, 2, 5.5, and 11 Mbps. The
SBG1000
attempts to transmit at 11 Mbps. If there are
obstacles or interference, it automatically steps down to the highest rate that allows
transmission. Use this setting if the wireless LAN has fully-compliant IEEE 802.11b clients.
The default is 1, 2, 5.5, 11 Mbps.