Iomega SBG1000 - Manual (Page 105)

99 SBG1000 Wireless Cable Modem Gateway User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Setting Up a USB Driver
The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG1000.
Perform one of the following procedures based on your Windows version:
•
“Setting Up a USB Driver in Windows 98” on page 100
•
“Setting Up a USB Driver in Windows 2000” on page 104
•
“Setting Up a USB Driver in Windows Me” on page 107
•
“Setting Up a USB Driver in Windows XP” on page 108
The SBG1000 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect
through Ethernet only.
If you have a problem setting up the USB driver, remove it by performing one of the following procedures:
•
“Removing the USB Driver from Windows 98 or Windows Me” on page 109
•
“Removing the USB Driver from Windows 2000” on page 112
•
“Removing the USB Driver from Windows XP” on page 115
Caution!
Be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is inserted in the
CD-ROM drive before you plug in the USB cable.