Motorola Organizer - Manual (Page 22)

16 Chapter 2
Using reminder alarms
If you set a reminder alarm when you create an event in the
clipOn, or set an alarm for an event in your PIM and
synchronize, the clipOn alarm will remind you of that event.
When an alarm sounds, go to the Home screen to read the
reminder details. Press any key to turn off the alarm. Press
or to clear the reminder notice.
Editing your Calendar
You can create, modify, and delete Calendar events by
changing to Edit mode and using the clipOn’s Wizards.
To create a new event:
1 Press in the Calendar module or in the Home screen,
then choose New Event.
2 Choose the new event type by highlighting it using or
, and then press .
3 The next Wizard screen will vary, based on the profile you
chose during the StarTAC clipOn Setup. It will show a pre-
set QuickList of event subjects. Use
or to choose
from the list, and then press .
To create an event that is not listed in the QuickList, select
“Other Event.” Then specify the event subject and press
when you are finished. This subject will be added to the
top of your QuickList.
4 Confirm the event’s type and subject by pressing .
5 Select an event participant (or None if there is no other
participant). If you choose:
Select the Event
Type from the list.