Moog DS2100 - Manual (Page 57)

SECTION 3: WIRING AND INSTALLATION
DS2100 User's Manual (Preliminary)
PAGE 3-51
3.11.4 Motor Resolver Connection
Wire the DS2100 resolver cable in accordance with Figure 3.37 and Table 3.24.
For CE compliance, shield should be attached on both sides of resolver
cable.
Required for
CE-Compliance
NOTE:- Avoid running the resolver cable near other high
power wiring, especially the motor power cable, if possible.
NOTE:- Cable Length should not exceed 30m (100 feet).