Motorola A3100 - Manual (Page 45)

43 synchronize
2 Connect your phone to your PC using a USB
cable.
Note: For more detailed information, see “Connecting a
mobile device to a PC” in ActiveSync Help on your PC, the
Microsoft Web Site for ActiveSync or the Motorola support
Web site at www.motorola.com/consumer/support.
sync with a Bluetooth® connection
Once Microsoft ActiveSync or Windows Mobile Device
Center is installed on your PC, you can connect it to your
phone and sync with a Bluetooth connection.
Note: In order to use this feature, your PC needs Bluetooth
wireless or a Bluetooth PC adaptor accessory.
1 Follow the instructions in ActiveSync Help for
configuring Bluetooth connections on your PC to
support ActiveSync.
2 Turn on the device.
3 On your phone, verify that Bluetooth wireless is turned
on (tap
Start > Settings > Connections tab > Wireless Manager >
Bluetooth On).
4 Tap
Start > Settings > Connections tab > USB to PC.
5 Check
ActiveSync Mode, then tap ok.
6 Tap
Menu > Connect via Bluetooth. Ensure that your phone and
PC are within close range. If this is the first time you
have connected to this PC using Bluetooth wireless,
you need to complete the Bluetooth wizard on your
phone and set up a Bluetooth partnership with the PC
before synchronizing.
7 Tap
Sync.
8 When finished, tap
Menu > Disconnect Bluetooth. To conserve
battery power on your phone, turn off Bluetooth power
(see page 38).
sync over the air
To sync your phone over the air (OTA) you need to sync it
directly with your company’s Microsoft® Information
Server or Microsoft® Exchange Server (running the
appropriate version software). For more information about
this set-up, see the Motorola support Web site at:
www.motorola.com/myMotoSurf
Microsoft™ Windows™ Mobile and ActiveSync
Support:www.microsoft.com/windowsmobile.
You can also contact your system administrator to set up
this synchronization.