Motorola PTP 400 Series - Manual (Page 82)

80
After clicking on OK, the following VLAN options are added to the LAN Configuration window:
Figure 33 - Additional VLAN options
These parameters control whether the management interfaces (HTTP/SNMP/SMTP/SNTP)
use a VLAN. Selecting this option presents the user with extra fields in which to enter the
Management VLAN ID, Priority and whether to validate the VLAN ID.
If communication with the unit is lost due to mis-configuration or the user forgot the VID that
has been set. The unit can be recovered by resetting the unit to factory defaults as described
in Section 3.3.2 “The PIDU Plus – ”.
Note: The internal Ethernet stack used to manage a unit does not support double VLAN
tagged packets. Double VLAN tagged packets will be discarded.
Note: If you loose contact with your unit due to mis-configuration you will need to reset your
unit to factory default as described in Section 3.3.2 “The PIDU Plus – ”