Motorola PTP 400 Series - Manual (Page 28)

26
Each end of the link consists of:
• An integrated outdoor transceiver unit containing all the radio and networking electronics
hereafter referred to as the Outdoor Unit (ODU).
• An indoor connection box containing a mains power supply, status indicators and network
connection. Hereafter referred to as the Power Indoor Unit Plus (PIDU Plus).
• Units will normally be supplied pre-configured as a link.
Power is fed into the PIDU Plus from the mains via a standard “figure of eight” mains plug.
The network connection is presented to the user at the PIDU Plus via an RJ45 socket.
Connection between the ODU and PIDU Plus is made using standard shielded CAT5 UV
resistant cable. The spare twisted pairs of the cable are used to feed power from the PIDU
Plus to the ODU.