2 making the connection at the odu, Making the connection at the odu, Figure 20 - connections at the odu – Motorola PTP 400 Series User Manual

Page 56

7.7.2 Making the Connection at the ODU

The following procedure describes how connection is made at the ODU. It is often easier to

carry out this procedure on the ground or a suitable surface prior to mounting the ODU.

Ensure no power is connected to the PIDU Plus or present on the cable before connecting

the ODU.

Step 1: Assemble the cable as described in

5.7.1 above

Step 2: Insert the RJ45 connector making

sure that the locking tab snaps home

Step 3: Screw in the body of the weather

proofing gland and tighten

Step 4: Screw on the clamping nut and

tighten

Figure 20 - Connections at the ODU