Metz LCD-TV None - Manual (Page 88)

88
35.1 Connecting a Hifi
Amplifier/AV Receiver
Registering the AV Device with the TV
• Enter the TV menu by pressing "MENU".
• Press the yellow key
to open the "AV Devices"
menu.
• Use the cursor control key ̆ to select "Hifi
Amplifier" in the device selection.
• Press "OK" twice, use the cursor control key ̆ to
select "Signal Types", and press "OK"..
• For connection type ᕡ , select the signal type
"Signal IN - SPDIF“.
For connection type
ᕢ , select the signal type
"Signal IN – Stereo".
Confirm the setting by pressing "OK"
• Press the "EXIT" key to close
the TV menu.
Sound:
• To configure the sound set-
tings of the LCD TV, press
the yellow key
and use
the cursor control key ̄ to
select the menu item "Sound
via ...".
• For connection type ᕡ, use
the - + key to select "Sound
via Hifi".
The speakers of the LCD TV are muted. The sound
(AC3 or stereo sound) is rendered over the spea-
kers of the Hifi set.
• For connection type
ᕢ, use the - + key to select
"Sound via surround".
The speakers of the LCD TV are used as the centre
box. The sound (AC3 or stereo sound) is rendered
over the speakers of the Hifi unit.
MENU
Opening the menu
OK OK
OK
EXIT
Connect as follows:
HiFi amplifier Stereo no signal Cinch
Name
Signal types
connect
HiFi amplifier
AV-Receiver
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.2
DVD/Videorec.1
F1 ➔
select
connect
and clear
OK
✗
AV devices
HiFi
➔
➔
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 88