Metz LCD-TV None - Manual (Page 38)

38
16.2 Recording Control Opening the menu
This menu item is not available in a 2 ** menu.
In the menu item "Recording control", you can set a
lead time and an overrun time for timer recordings.
The TV set is automatically switched to the pro-
gramme position from which the recording is to
be made at a time which is the number of minutes
programmed as the lead time before the pro-
grammed starting time for the recording.
At the end of the programmed recording time, the
TV set remains set to this programme position for
the period programmed as the overrun time.
For VPS recordings, the TV set
is automatically switched to the
programme position from
which the recording is to be
made at a time which is the
number of minutes programm-
ed as the VPS lead time before
the programmed starting time
for the recording. By default,
the TV set switches to this pro-
gramme position about one
hour before the programmed
start time for a VPS recording.
Setting the lead time, VPS lead
time and overrun time
• Press the "MENU" key to open the TV menu.
• Press the green key
to open the "Timer"
menu.
• Use the corresponding numeric key (in the
example:
´
) to select the menu item "Recor-
ding control".
• Use the cursor control key to select the desired
menu item.
• Press the "OK" key and then, in the setting win-
dow, use the - + key to set the desired lead or
overrun time.
• Press the "OK" key to save the settings.
• Press the "EXIT" key to close the TV menu.
☞
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
MENU
OK
EXIT
OK
ᕥ
Lead time 5 min
Lead time with VPS
Overrun time
Lead time
Recording control
Timer setting
Timer control
Reminder
Childlock
Timer
Save with
Abort with
OK
MENU
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 38