Registering av devices opening the menu – Metz LCD-TV None User Manual

Page 69

25. Registering AV Devices

Opening the menu

(audio/video) devices are external devices

which deliver video and/or audio signals (such
as video recorders, DVD players, DVD recorders,
etc.) and which can be connected to TV sets.

All commonly available AV devices are listed in
the menu "AV devices".

Note that you must always connect AV
devices exactly as shown in the connection
diagram in the TV menu of your TV set !

SVHS/Hi8 and Data Logic video recorders must always
be connected to the EURO1 socket of the TV set.

In the factory, the EURO1 socket is programmed
for a video recorder and the EURO2 socket is pro-
grammed for a DVD player.
Registering an AV device on
the TV set

• Press the "MENU" key to

open the TV menu.

• Press the yellow key

open the menu "AV devices".

• Use the cursor control key

to select the AV device you
wish to register and press
the "OK" key.

• Press numeric key

and

use the - + key to select the appropriate signal

types (OUT/IN) for this device and press "OK"
to confirm your selection. For details of the sig-
nal types, see page 66 and the operating
instructions for the AV device being connected.

• If desired, press numeric key

, enter a diffe-

rent name for this AV device and press "OK".

• Use the cursor control key to select "Connect"

and press the "OK" key. Then connect the AV
device to the corresponding EURO socket.

☞

Caution! Connection of
a new device may cau-
se an existing connec-
tion diagram to be
changed. If so, you
must reconnect the AV
devices accordingly.

☞

ᕢ

EXIT

Connect as follows:

Videorecorder CVBS CVBS EURO1

DataLogic

Name

Signal types

connect

HiFi amplifier

AV-Receiver

Other device 2
Other device 1

Satellit / set top

DVD Player 2
DVD Player 1

DVD/Videorec.2
DVD/Videorec.1

➔

select
connect

and clear

✗

VCR

➔

AV devices

606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 69