Metz LCD-TV None - Manual (Page 77)

77
MENU
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
27. Sound via HiFi Amplifier
HiFi output
On the rear of the TV set, you will find audio
sockets and a digital audio-out socket (see page
86) which can be used to connect the TV set to a
HiFi system (HiFi amplifier).
Settings need to be made in the menu items "HiFi
output" and "Sound settings" only if the TV set is
connected to a HiFi system.
If you want adjust the sound settings exclusively on
the HiFi system, you must set the HiFi output to
constant
.
You can then no longer adjust
the volume and tone with the
Metz remote control. The mute
function remains active.
If you want to be able to chan-
ge the sound settings with the
Metz remote control, you must
set the HiFi output to variable.
Setting the HiFi output
• Press the "MENU" key to
open the TV menu.
• Press the red key to open
the menu "Configuration".
• Use the cursor control key ̈ to select
"Initial programme position".
• Use the corresponding numeric key (in the
example:
·
) to select " HiFi output".
• In the setting window, use the - + key to set the
desired parameters.
• Press the "OK" key to save the new settings.
• Press the "EXIT" key to close the TV menu.
In normal TV Mode, the function "Sound via..."
can be activated temporarily by pressing the yel-
low key
and using the - + key.
Opening the menu
ᕢ
OK
EXIT
Data Logic adjustm.
CI dialogue via
EPG settings
Operating
Sound settings
HiFi output 2)
Init. prog.position
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating Configuration
Change with
Accept value with .
– +
OK
F1 ➔
HiFi output constant
Output level 50%
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 77