Metz LCD-TV None - Manual (Page 40)

40
EXIT
In the case of TV sets with one front end, the pic-
ture in picture function (PIP) can only be used for
the superimposition of an AV set.
In this regard, the following superimposition
options are possible:
If an analogue TV station is displayed on the
screen
, it is only possible to call up the picture of
an AV set, which is connected either to the
“HDMI” or the “DVI-D” socket.
If a digital TV station (DVB-C or DVBT) is display-
ed on the screen
, it is possible to call up the pictu-
re of any AV set, regardless of the socket it is con-
nected to.
Activating the PIP function
• The F1 key is pre-programmed with the picture-
in-picture function.
• You can use the cursor control keys ̇
̈ to move the PIP picture on the
screen. The last position to which this
picture was set is saved.
• By pressing the "OK" key, you can set
the frame of the PIP picture to active
(red) or inactive (white).
• The contents of the PIP picture can
be changed only if its frame is active
(red).
If you wish to display the picture from
a connected AV device as a picture-in-
picture, press the "AV" key and then use the
numeric keys
to select the desired AV device.
• Pressing the red key swaps the contents of
the two pictures.
• Pressing the green key causes the PIP picture
to expand to fill the screen and terminates the
PIP function.
• To close the PIP picture, press the "EXIT" key.
17. Special Functions
Picture-in-Picture
Opening the menu
F1
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 40