Metz LCD-TV None - Manual (Page 75)

75
25.1 Removing AV Devices Opening the menu
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
This menu item is not available in a 2 **
menu.
If desired, you can change the factory settings for
AV devices (a video recorder on the EURO1
socket and a DVD player on the EURO2 socket).
Removing an AV device from the TV set
• Press the "MENU" key to open the TV menu.
• Press the yellow key to open the menu "AV
devices".
• Use the cursor control key to select the device
you wish to remove and press the "OK" key.
The cursor is on the line "Connect".
• Press the "OK" key again.
A message is displayed,
asking if you really want to
change the connected devi-
ce.
• Press the OK key again to
remove the connected devi-
ce.
• Press the "EXIT" key to clo-
se the TV menu.
☞
Connect as follows:
DVD/Videorec.1
DataLogic
Name
Signal types
connect
HiFi amplifier
AV-Receiver
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.2
DVD/Videorec.1
F1 ➔
select
connect
and clear
OK
VCR
AV devices
MENU
EXIT
OK
OK
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 75