Metz LCD-TV None - Manual (Page 64)

64
For a manual station search, you must know the
channel number or the frequency of the station
you wish to find.
Executing the manual search
• Press the "MENU" key to open the TV menu.
• Press the red key to open the menu "Confi-
guration".
• Use the corresponding numeric key (in the
example:
´
) to select " DVB-T".
• In the setting window "Antenna", you can switch
the supply voltage for an antenna on or off with
the - + key.
• Use the corresponding
numeric key (in the exam-
ple:
·
) to select "search
settings".
• In the setting window, use
the - + key to select "All",
"FTA only" or "FTA +
CICAM" (see also page 63).
• Press the "OK" key and use
the corresponding numeric
key (in the example:
¿
) to
select "Manual search".
• In the setting window, use
the numeric keys to enter the channel
number or the frequency.
If you know further data of the desired sta
tion, select the menu item "Mod. parameter"
and use the - + key to change the setting there to
"Manual". You can then enter further data.
• After input of the station data, use the cursor control
key to select the menu item "Station search" and press
the "OK" key to confirm your selection.
The station settings are saved.
22.2 Setting Stations
Manual DVB-T*station search
Opening the menu
MENU
ᕥ
ᕤ
Channel 05 Frequency 177.500 Mhz
Mod.-Parameter auto. Start station search
General settings
Manual search
Automatic search
Search settings
Antenna
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating Configuration
Start station
search with . OK
F1 ➔
Transmission 8k Mode Modulation64 QAM
Mod. Parameter manuell Guard Intervall 1/8
Code rate
3/4 Start station search
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
*depending on equipment
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 64