Metz LCD-TV None - Manual (Page 82)

82
30. Operation without the
Remote Control
Operation without the remote control is provided
as an emergency measure in case the batteries of
your remote control are exhausted or the remote
control is not readily available.
You will find the local control on the bottom of
the TV set on the left side (Milos) or behind a flap
(Puros, Talio), which is opened by pressing•••.
Switching on
Press the main power switch on the TV set. After
about five seconds, the TV set is switched on with
programme position 1 or the programmed initial
programme position selected.
You can also use the following functions directly
on the TV set, without a remote control. For func-
tions which require further adjustments, the func-
tion remains preselected for ten seconds.
Programme selection
Press the -/+ buttons.
Volume
Press and hold the preselection key F until the bar
display for the volume appears on the screen. Then
press the "-" or "+" button to adjust the volume.
Contrast
Press and hold the preselection key F until the bar
display for the contrast appears on the screen. Then
press the "-" or "+" button to adjust the contrast.
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 82