Metz LCD-TV None - Manual (Page 66)

66
For a manual station search, you must know the
channel number or the frequency of the station
you wish to find.
Executing the manual search
• Press the "MENU" key to open the TV menu.
• Press the red key to open the menu
"Configuration".
• Use the corresponding numeric key (in the
example:
ᕦ
) to select
"DVB-C".
• The cursor is on the menu
line "Search settings".
• Press the "OK" key and, in
the setting window, use the -
+ key to select "All", "FTA
only" or "FTA +CICAM"
(see also page 63).
• Press the "OK" key and use
the corresponding numeric
key (in the example:
ᕣ
) to
select "Manual search".
• The cursor points to "Chan-
nel".
• In the setting window, use the numeric keys to
enter the channel number (or special channel
number) or the frequency of the desired station.
If you know further data of the desired station,
select the menu items "Modulation" and "Symbol
rate" and use the - + key or the numeric keys to
change the settings there.
• After input of the station data, use the cursor
control key to select the menu item "Station
search" and press the "OK" key to confirm your
selection.
The station settings are saved.
22.3 Setting Stations
Manual DVB-C*station search
Opening the menu
MENU
ᕦ
ᕣ
OK
Channel 05 Cable channel --
Frequency 64.500MHz Symbol rate 6900
Madulation Auto.mode Start station search
General settings
Manual search
Automatic search
Search settings
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating Configuration
Start station
search with . OK
F1 ➔
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
*depending on equipment
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 66