Metz LCD-TV None - Manual (Page 37)

37
Normally, the TV set will determine the current date and
time from the Teletext signals of the currently selected
station (providing this station sends Teletext).
Note: For this the device must be turned on with
the mains switch.
If this is not the case, or if an incorrect date or
time is displayed, you can set the date and time
manually.
In almost all cases, you will not need to do this.
Even the changeover between winter time and
summer time is executed automatically.
Setting the time and date manually:
• Press the "MENU" key to
open the TV menu.
• Press the green key to
open the "Timer" menu.
• Press the numeric key
¿
to
select "Time settings".
• Press the "OK" key and
then, in the setting window,
enter the current time with
the numeric keys.
• You can then start the internal
clock precisely by pressing
the "OK" key when the time
you have entered is reached.
• Press the numeric key
·
to select
"Current date".
• In the setting window, enter the date with the
numeric keys.
• Press the "OK" key to save the settings.
• Press the "EXIT" key to close the TV menu.
The local time offset is the difference between
the local time where the TV set is installed and
Greenwich Mean Time (GMT). The TV set nor-
mally detects this time offset and also the addi-
tional changeover to summer time.
The time needs to be set manually only if it is
not detected automatically.
i
16.1 Setting the Time and Date Opening the menu
MENU
OK
EXIT
OK
OK
ᕤ
ᕢ
Time 20:00:00
Local time offset
Current date
Current lokal time
Recording control
Timer setting
Timer control
Reminder
Childlock
Timer
Save with
Abort with
OK
MENU
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 37