Metz LCD-TV None - Manual (Page 83)

83
When receiving a dual-language pro-
gramme, you can switch between the
two sound channels.
In TV mode, press and hold the yellow
key
until the sound function "Sound
mode" is selected.
Then use the - + key to select Sound 1
or Sound 2.
32. Sound 1, Sound 2
Headph. Vol.
Sound mode Cannel 2
Spatial
Spatial
Sound mode Cannel 2
Balance
31. Connecting Headphones
The headphone socket is located behind a flap on
the left side of the TV set (see Section 35).
Tilt the flap on the Milos up with your fingernail.
On the Puros or Talio open the flap by
pressing •••.
See also ch. 35.
We recommend the use of headphones with an
impedance of at least 32 Ω. The use of headpho-
nes with a lower impedance will reduce the dyna-
mic range of the sound.
You can save the headphone volume as a stan-
dard value.
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 83