Metz LCD-TV None - Manual (Page 34)

34
b) Permitted programmes:
Activate the childlock as described in step a).
Use the corresponding numeric key to select the
menu item "Permitted xx progs." (xx = TV, radio
or AV). Press the "OK" key and, in the setting win-
dow, enter the programme positions with the
numeric keys or use the - + key to select the des-
ired programme positions.
• Press the "OK" key to save the new settings.
c) TV start – TV end
Activate the childlock as des-
cribed in step a). In the setting
window, use the cursor control
key to select the start and end
times and enter the desired
times with the numeric keys.
Press the "OK" key to save the
settings.
Protecting the childlock
settings with your code
• Use the cursor control key to
select "Code" and enter your
personal code (password)
with the numeric keys.
Make a note of this code, since the child
lock can be deactivated only if the correct
code is entered !
• Press the "OK" key to save the settings.
• Press the "EXIT" key to close the TV menu.
• Switch off the TV set with the
key.
The childlock is not fully activated until the
TV set is switched off.
Deactivating the childlock
If the childlock is active, a window requesting your
personal code is displayed each time the TV set is
switched on. Entering the correct code enables the
TV set and it can then be used normally until it is
switched off again. To cancel the childlock func-
tion, proceed as described in step a), above, and
set the childlock to "Inactive".
☞
☞
Opening the menu 14. Childlock
É
Factor
y setting
Code: 0000
✂
Prog A Kabel 1 Prog B -----
Prog C ----- Prog D -----
Prog E ----- Prog F -----
Permitted AV prog.
Permitted radio prog.
Permitted TV prog.
Settings
Recording control
Timer setting
Timer control
Reminder
Childlock
Timer
Enter programme
position and save
with .
: clear.
OK
I I
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 34