Metz LCD-TV None - Manual (Page 47)

47
The remote control has four function keys: F1, F2,
F3 and AV. You can programme these function
keys with any of the available functions.
If you press and hold any function key, a
window with the available functions is dis-
played. The picture on the left shows the
functions available for the F2 key.
Programming function key F1, F2, F3 or
AV with a function
• Press the "MENU" key to open the TV
menu.
• Press the red key to open the "Confi-
guration" menu.
• Press and hold the F1 key to display the availa-
ble functions.
• Use the cursor control key ̄̆ or the correspon-
ding numeric keys to select the desired "Func-
tion for.." (in this example: F2).
• Press the "OK" key and then use the cursor con-
trol key to select one of the available functions.
• Press the "OK" key to assign this function to the
selected function key (the
selected function is marked
with "X").
• Press the "EXIT" key to close
the TV menu.
If a function key is pro-
grammed with a func-
tion, this function can be
called by briefly pres-
sing the function key.
Pressing and holding
the function key
displays a list of all
available functions.
☞
18. Programming the Function Keys Opening the menu
F2
F1
MENU
Special functions 2
1 Normal/Speech
9 Timer overview
0 Direct recording
OK
EXIT
Volume correction 0 Tone settings gen.
Forced mono 7) off
Sound corrections
Colour standard 3) 7)
Picture quality
Picture correct.
Enter logo
Station contained in EPG
CA module 5)
Signal quality 5)
DVB-prog. info 5)
Frequency/channel 7)
0010 Hessen 3
0009 Südwest
0008 MDR
0007 PRO 7
0006 RTL 2
0005 RTL
0004 SAT 1
0003 Bayern 3
0002 ZDF
0001 ARD
Station table
Change with
Accept value with
– +
OK
✗
F1 ➔
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 47